EFG215 2008 model

All Jungheinrich fork lifts, stand ups, tuggers,
Post Reply
4ForksSakeNW
Posts: 0
Joined: Tue Sep 17, 2019 8:11 am

EFG215 2008 model

Post by 4ForksSakeNW »

Hi I have a headbanger here... I have the code 0802 on the display which, afaik, means a node on the CAN isnt responding.

We had a tech look at it but didnt really give us much info.

I have the cab off and checked, then rechecked the wiring for the CAN, but nothing is wrong with it...

I have tried linking the CAN lines and disconnecting the plug from the different units in the truck with still no luck.

I have no manual either... so I am unsure if the supplies/earths are present where they should be.

Is there a way of checking each modules individualy?

Cheers for any help.

Chris
4ForksSakeNW
Posts: 0
Joined: Tue Sep 17, 2019 8:11 am

Re: EFG215 2008 model

Post by 4ForksSakeNW »

. Just measured the voltage on the CAN lines....
Its 0.200vdc .. and 0.35vac ... ?

Seems a bit low..

Should be betwee 2v and 4v?

Cheers.

Chris.
Post Reply