Reading Codes on dash of Nissan forklift

Nissan Sit down Rider LP Gas Forklift questions and answers
Post Reply
Guest

Reading Codes on dash of Nissan forklift

Post by Guest » Sun Aug 28, 2016 12:26 am

Have codes on the dash of a Nissan LP forklift, how do I get a description of the code and clear them? I think I saw a way to get into it by pressing numbers on the meter panel and it will show a description and option to clear the codes.


User avatar
butchfork
Site Admin
Posts: 21
Joined: Sun Aug 21, 2016 12:01 am

Re: Reading Codes on dash of Nissan forklift

Post by butchfork » Sun Aug 28, 2016 10:01 pm

Well, since you did not tell us what model Nissan fork truck you had, we will give you the procedure if your dash looks like this below. This will give you a list of stored error codes and many other data parameters. You will then be able to clear the codes, but only after repairs have been made. If you do not repair the problem that set the codes, clearing them in the procedure below will not help, as the code will return.
See Error Code Chart
Step 1: Press and hold the #1 and 4 keys while turning the key to the "on" position.
nissan_forklift_dash_1.jpg
Read codes on Nissan forklift.
2: Now the screen should show all the different data parameters to choose from. Use the #2(down arrow) key to go down the list of selections, each one highlighted as you move. Once you get to the bottom, the next page will show.
nissan_foklift_dash_2.jpg
Nissan forklift- List of data parameters that can be viewed.
3. When you get to the second page, you will see "Fail Log".
nissan_forklift_dash_4.jpg
Nissan forklift- Select fail log.
4. Now press the "ENTER" key, #5 on the pad to select the fail log of stored trouble codes. Each error code will be displayed with a short description of the trouble code.
nissan_forklift_dash_5.jpg
Nissan forklift- List of stored error codes.
5. To clear them, page down until you see "Error Log Erase".
nissan_forklift_dash_6.jpg
Nissan forklift- How to clear stored codes.
6. Now press the enter key to erase the stored codes after the repairs to the forklift have been made, then turn the key off and restart the truck normally. The code should now be cleared.
nissan_forklift_dash_7.jpg
Nissan forklift- Press enter after repairs have been made.
CERTIFIED TECHNICIAN - Jungheinrich Level 5
Caterpillar- Mitsubishi- Nissan

phong
Posts: 0
Joined: Sat Aug 12, 2017 2:52 am

Re: Reading Codes on dash of Nissan forklift

Post by phong » Sat Aug 12, 2017 3:13 am

Hi, I have a Nissan electric forklift the an error message.
"CHECK METER COMMUNICATION PROBLEM 558"
Can you tell me what this means or how to correct it.

User avatar
butchfork
Site Admin
Posts: 21
Joined: Sun Aug 21, 2016 12:01 am

Re: Reading Codes on dash of Nissan forklift

Post by butchfork » Sun Aug 20, 2017 11:43 am

We need to know what is the full model number off the data tag of this this Nissan forklift.
CERTIFIED TECHNICIAN - Jungheinrich Level 5
Caterpillar- Mitsubishi- Nissan

randy

Re: Reading Codes on dash of Nissan forklift

Post by randy » Sun Feb 04, 2018 7:22 am

Hi I have the same problem with my Nissan electric forklift
Model: T1B2L2OU
Serial no: T1B2-000119

error: “CONTROLLER COMMUNICATION MALFUNCTION: 558”

Post Reply
  • Similar Topics
    Replies
    Views
    Last post