Proper forklift mast lifting techniques

General information related to forklift safety, repair and safe operation.
Post Reply
hiandlotech
Posts: 64
Joined: Fri Aug 26, 2016 8:38 pm

Proper forklift mast lifting techniques

Post by hiandlotech » Tue Aug 23, 2016 8:54 pm

Proper mast lifting techniques.
There are a few ways to get underneath a forklift either to service brakes, track down a wire, or even remove a belly pan to access the oil drain plug. One of the most common ways is to use two blocks of oak wood by lifting the mast all the way back, inserting one piece of oak wood on the OUTSIDE channel of the mast, you may have to lift the forks a bit to gain clearance, then ?lt forward until the truck deadhead’s, you should feel the front end lift up and the wheels should be off of the ground.

There are also heavy duty truck ramps you can drive on, if you're really lucky you might have access to a hydraulic lift with arms to lift it.


RoyOtis
Posts: 0
Joined: Thu Mar 01, 2018 6:21 pm

Re: Proper forklift mast lifting techniques

Post by RoyOtis » Tue Apr 10, 2018 11:10 am

Tilt mast back, place blocks under mast, tilt mast forward.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post