Clark electric forklift Please Help
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
Yes I did that about two weeks ago haha but still no luck
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
The light goes on and off like it should for p-Brake
-
hiandlotech
- Posts: 64
- Joined: Fri Aug 26, 2016 8:38 pm
Re: Clark electric forklift Please Help
Okay I'm working on getting a break down for this code, but yes it is a possible seat switch code being a -1 operator error code, just to be safe you can check continuity from wire 6 of the controller to the parking brake wire,
Caterpillar Certified- Nissan Certified
Clark Technician- Jungheinrich
mexiCAN
Clark Technician- Jungheinrich
mexiCAN
-
hiandlotech
- Posts: 64
- Joined: Fri Aug 26, 2016 8:38 pm
Re: Clark electric forklift Please Help
Okay here's an update, on the parking brake wire it should have 36 volts coming from the controller, so check for voltage on the parking brake switch, I'm trying to find a different angle but code -01 is a parking brake error code,
Caterpillar Certified- Nissan Certified
Clark Technician- Jungheinrich
mexiCAN
Clark Technician- Jungheinrich
mexiCAN
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
Yes parking brake is getting 36
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
Seat switch is not
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
Don’t know if this will help but is under the seat
- Attachments
-
- TMG 15S electric forklift wiring schematic.
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
Here is another
- Attachments
-
- Clark TMG 15S electric forklift wiring harness schematics.
-
-
hiandlotech
- Posts: 64
- Joined: Fri Aug 26, 2016 8:38 pm
Re: Clark electric forklift Please Help
Okay your missing voltage somewhere, goes from the key switch to the park brake switch, when park brake switch is closed which is wire 7 it feeds directional switches, seat switch, and foot brake switch,so one of those is not completing the circuit.
So yes it a possible that you are missing voltage to the seat switch, you can run your own wire to the seat switch to close the circuit or look for breakage
So yes it a possible that you are missing voltage to the seat switch, you can run your own wire to the seat switch to close the circuit or look for breakage
Caterpillar Certified- Nissan Certified
Clark Technician- Jungheinrich
mexiCAN
Clark Technician- Jungheinrich
mexiCAN
-
KeithDaley
- Posts: 0
- Joined: Tue Jan 09, 2018 11:49 am
Re: Clark electric forklift Please Help
I am getting 36 to parking brake and foot brake but not seat switch. And yes if I run a jumper to the seat switch it works!
Now I guess I just have to find the break in the wire for the seat switch
Thanks for all the help you are awesome!
Now I have another question haha
I have a Hobart Battery Mate charger.
S/N 498CS45764
Model: 750H3-18C
It’s a 3 phase charger but I do not have 3 phase at my new shop. I heard it can be wired to run on 2 phase or single phase. Do you know if it’s possible and if so how? Thanks again
Now I guess I just have to find the break in the wire for the seat switch
Thanks for all the help you are awesome!
Now I have another question haha
I have a Hobart Battery Mate charger.
S/N 498CS45764
Model: 750H3-18C
It’s a 3 phase charger but I do not have 3 phase at my new shop. I heard it can be wired to run on 2 phase or single phase. Do you know if it’s possible and if so how? Thanks again