Clark ecg 30

Basic electric forklift information related to all makes and models.
Post Reply
kmaterioli
Posts: 0
Joined: Tue Dec 31, 2019 6:08 pm

Clark ecg 30

Post by kmaterioli »

I have a Clark ecg30 electric with no forward or reverse. I have checked all brake and seat switches. When accelerator is pressed down there is a double click of the contactor in either direction and I have to cycle the key to start everything back up. Everything else works fine except forward and reverse. The card, transistor, dash and accelerator pot was changed before I inherited this problem. Also there is 36 volts at wire 15 and wire 27 on forward contactor and the cable going to the motor drops from 36 volts to 17 volts.
Post Reply